Wiki
Paste the following commands in your terminal window
sudo ip tunnel add 6project mode sit remote "IPv4-Server-POP" local "YourIPv4" ttl 255
sudo ip link set 6project up
sudo ip addr add 2001:db8:1:2:3::2/80 dev 6project
sudo ip route add ::/0 dev 6project
/etc/network/interfaces file
auto 6project
iface 6project inet6 v4tunnel
address 2001:db8:1:2:3::2
netmask 80
endpoint "IPv4-Server-POP"
local "YourIPv4"
ttl 255
gateway 2001:db8:1:2:3::1
/etc/netplan/99-6project-tunnel.yaml and paste the following inside it
network:
version: 2
tunnels:
6project:
mode: sit
remote: "IPv4-Server-POP"
local: "YourIPv4"
addresses:
- "2001:db8:1:2:3::2/80"
gateway6: "2001:db8:1:2:3::1"
/etc/sysconfig/network file to make sure you have the following configuration
NETWORKING_IPV6=yes
IPV6_AUTOCONF=no
IPV6_DEFAULTGW=2001:db8:1:2:3::1
IPV6_DEFAULTDEV=sit1
DEVICE=sit1
BOOTPROTO=none
ONBOOT=yes
IPV6INIT=yes
IPV6TUNNELIPV4="IPv4-Server-POP"
IPV6TUNNELIPV4LOCAL="YourIPv4"
IPV6ADDR=2001:db8:1:2:3::2/80
Paste the following commands in your terminal window
sudo ifconfig gif0 create
sudo ifconfig gif0 tunnel "YourIPv4" "IPv4-Server-POP"
sudo ifconfig gif0 inet6 2001:db8:1:2:3::2 2001:db8:1:2:3::1 prefixlen 128
sudo route -n add -inet6 default 2001:db8:1:2:3::1
Paste the following commands in your CMD window running as Administrator
netsh interface teredo set state disabled
netsh interface ipv6 add v6v4tunnel interface=IP6Tunnel localaddress="YourIPv4" remoteaddress=IPv4-Address-POP
netsh interface ipv6 add address interface=IP6Tunnel address=2001:db8:1:2:3::2
netsh interface ipv6 add route prefix=::/0 interface=IP6Tunnel nexthop=2001:db8:1:2:3::1
Paste the following commands
configure terminal
interface Tunnel0
description 6project.org Tunnel Broker (IT)
no ip address
ipv6 enable
ipv6 address 2001:db8:1:2:3::2/80
tunnel source "YourIPv4"
tunnel destination "IPv4-Server-POP"
tunnel mode ipv6ip
ipv6 route ::/0 Tunnel0
end
write
Paste the following commands
/interface 6to4 add comment="6project.org Tunnel Broker (IT)" disabled=no local-address="YourIPv4" mtu=1280 name=sit1 remote-address="IPv4-Server-POP"
/ipv6 route add comment="" disabled=no distance=1 dst-address=::/0 gateway=2001:db8:1:2:3::1 scope=30 target-scope=10
/ipv6 address add address=2001:db8:1:2:3::2/80 advertise=no disabled=no eui-64=no interface=sit1
Still having issues configuring your tunnel get in touch with us with over at [email protected]